Post & Panel

Q. What type of posts are used?
A. It will depend on the type of Panels used. Timber or Concrete H posts can be used with a concrete plinth on the ground

Q. What types of timber panels are available?
A. Various styles are available e.g. Hit & Miss, Arched top, Closed Picket, Overlap, Trellis, Barrel Board, Shiplap, etc

A. Are all Timber Panels Pressure Treated
B. All Timber Panels and Timber Posts are Pressure Treated

Q. Are Concrete plinths with patterns available?
A. Yes – rock faced or brick patterns are available

Q. Do the fence Panels look the same from both sides?
A. It depends on the type of panel but most panels can be manufactured to look the same from both sides

Post & Rail

Q. What type of timber is used?
A. Swedish redwood, Latvian redwood or native pine

Q. What size are the rails
A. Normally 100mm X 48mm X 4800mm

Q. What type of nail is used?
A. 90mm hot dipped galvanised nails

Q. What size posts are available ?
A. 150mm X 75mm X 1800mm

Chainlink

Q.  What heights are available?
A.  Heights vary from 900mm to 3000mm

Q. What type of post is used?
A. Concrete, metal or wood

Q. Will the wire rot?
A. No – all of the wire is hot dipped galvanised

Q. Is the PVC coated wire galvanised?
A. Not all PVC coated chainlink is hot dipped galvanised

Palisade

Q. What heights are available?
A. It can be made to order in any height but 1.2m, 1.8m and 2.4 metre are standard

Q. What finishes are available?
A. Galvanised (silver), or galvanised and powder coated (green or black) are standard. Other colours are also available as special orders.

Q. Are there different tops available?
A. Yes – triple spiked, round topped & notched

Q. Are the pails available in different thicknesses?
A. Yes – 2.5mm to 4mm

Timber Gates

Q. Is the timber treated?
A. Yes – All timber gates are pressure treated

Q. Are timber gates available in different sizes?
A. Yes – gate can be made in any size